Display Magnetic Frame

Product
Glass Types
Details
Versions

Information

The difference between the Classic magnetic frame and the new Display magnetic frame? In the case of the Display magnetic frame, the base element (the rear panel of the frame) is firmly bolted to the wall. The actual profile frame and the plexiglass are magnetically put onto the base element as a unit by means of the new Glasfix system. Thus, it is child’s play to open the frame, remove it and lock it again.

The second element of the Display magnetic frame is the Posterfix module especially developed by HALBE – integrated into the base element bolted to the wall. The poster is simply inserted from below and fixed to the wall by means of the clever clamping mechanism. No cumbersome flap profile, quick exchanging of the poster, no adhesive tape. The frame is simply attached again and adheres magnetically. The exchange of the poster is completed!

Profile selection

Colour selection

Stainless steel brushed

Palladium flat-lustrous

Plexiglass Gallery® UV 100 III, IV

III glossy, with protective film, thickness 3.0 mm
IV antireflective, matt / glossy, with protective film, thickness 3.0 mm

Plexiglass is especially shatter-proof and also protects delicate exhibits against ultraviolet radiation by virtue of its low light transmission. The disadvantages of plexiglass are its low scratch resistance and the somewhat more laborious care with a special antistatic cleaner. The appropriate cleaning agents can be found in our range of accessories.

Profile cross section & dimensional drawing

Available standard and special formats

min. 210 mm x 210 mm, max. 1000 mm x 1400 mm

Picture safety device 3

Here, the base element is securely bolted down directly to the wall. Your best bet is to combine the picture safety device BS 1 with the picture safety device BS 3 – in this way, picture and frame are perfectly protected at the same time.

BS 1 is appropriate for:
Classic, Distance, B1, Conservo, LED and Passepartout magnetic frames;
BS 3 can be ordered with the Classic, B1, Conservo, Display and Passepartout magnetic frames.

Picture safety device SL

As an alternative to the picture safety device BS 3 or BS 4, we also fabricate our magnetic frames with a keyhole picture safety device (BS SL). The frame is protected against inadvertent dropping or simple removal from the wall. With the required knowledge, however, it can be removed without tools from the keyhole position on the wall. The 4 necessary screws and universal dowels are included in the scope of delivery.

The picture safety device BS SL is appropriate for:
Display magnetic frame, LED magnetic frame, B1 magnetic frame, Conservo magnetic frame and the new Protect magnetic frame.

Note: The Display magnetic frame is fabricated with picture safety device BS 3 as a standard feature. The keyhole picture safety device BS SL can be ordered as an option at additional cost.

Maximum insertion depth

0,25 mm*

*up to approx. 300g/m² paper variety

» To the glossary

The Display magnetic frame is made to measure to the nearest millimetre and can be supplied with three different aluminium profiles in seven colours or coated according to RAL, either with glossy or antireflective plexiglass. On request also available with scratch-proof plexiglass, with keyhole picture safety device (BS SL) or even as customised solution for your project. We make the Display magnetic frame up to a poster format of 140 x 250 cm. Here is a hint regarding poster and paper for your printing service provider: The Posterfix module has been optimised for material thicknesses up to 0.25 mm, i.e. for paper with a grammage up to 300 g/m2 and more, depending on the volume of the paper.