HALBE hanger with height adjustment

NEW: Hanger sets with height adjustment

available in sets of 2 to 100 with graduated prices.

Everyone knows this: if you want to hang pictures perfectly level, you need a drill, a good eye and a spirit level. Despite the utmost care, the dowels and picture hooks often don't sit exactly at the same height in the wall and the frame hangs noticeably crooked. The new HALBE hanger puts an end to reworking around the drill hole, because with a gradual turn of the new hanger to the left or right, up to 3 mm of misalignment can be easily corrected in small steps.

• - designed for hanging magnetic frames at two points
• - also suitable for hanging at one point/center hole
• - six-stage height adjustment, from the central position: turn to the right = up to 1.5 mm higher, turn to the left = up to 1.5 mm lower
• - the hanger is suitable for countersunk screws with a maximum diameter of 4 mm

In addition to the HALBE hangers, depending on the set, the matching screws and universal plugs are also included in the set so that you can start mounting straight away. The new "hanger" is available in the following set variants:

Tip for use:

Do not immediately tighten the screw completely so that the hanger can be turned easily by hand. In the central position (before adjusting/turning to the left or right), the small symbol on the front of the hanger points upwards). After alignment, the screw should ideally be tightened by hand. The easiest way to achieve perfect alignment is with a spirit level or a line laser - see video.

Information on the screws and plugs:

• - Universal plug fischer DuoPower 6x30
• - Countersunk head screw 3.5 x 45 mm
• - Plug holds in all building materials
• - Two material components for the best load values and intelligent functions depending on the substrate
• - Secure functions for solid (expansion), perforated and panel materials (flaps/nodes)
• - Anti-rotation lock prevents the dowel from turning
• - Recommended for frame formats up to approx. 700 x 1000 mm, see download "Load table" from the manufacturer fischer (depending on the wall condition and frame weight)
• - Drill core diameter 6 mm
• - min. drill hole depth 40 mm
• - min. panel thickness 12.5 mm