set of 4 angle hooks, incl. dowels 8 x 40 Fischer DuoPower

set of 4 fischer DuoPower 8x40 WH, with angle hook

The fischer DuoPower is a plastic plug made from two components: The gray component made of high-quality nylon automatically activates the optimum functional principle (expansion, folding, knotting) for the best hold, depending on the building material. The expansion wings of the red component support secure expansion and offer additional security to the gray component. This means that the fischer DuoPower is always the right choice - even with an unknown building material. The narrow plug edge prevents it from slipping deeper during installation. In addition to fixing picture frames , the fischer Duopower with angled hook can also be used in a variety of ways for hanging other components directly on the wall - also ideal in combination with the picture lock BS 4 for theft protection.

• Anchor holds in all building materials
• Two material components for the best load values and intelligent functions depending on the substrate
• Secure functions for solid (expansion) and perforated and panel building materials (hinges/knots)
• Anti-rotation lock prevents the dowel from rotating as well
• recommended for frame formats from approx. 700 x 1000 mm 
  (see download "Load table" from the manufacturer fischer)
• Nominal drill core diameter 8 mm
• min. Drill hole depth 50 mm
• min. Panel thickness 12.5 mm
• Contents: 4 x angle hooks 5.5 x 58 mm, 4 x DuoPower 8 x 40

Tip for use:

The angle hook can be screwed vertically 90 degrees into the lateral/vertical legs of the base unit when suspended at two points and provides a secure hold.

When suspended at one or two points on the upper/horizontal leg of the base element , the angle hook should be turned slightly to the left or right until the frame rests securely on the shaft of the angle hook and not just on its head. If you have any questions, please contact the HALBE team.